Mal
0.1.0 - ci-build Norway flag

Mal - Local Development build (v0.1.0) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: MalPatient - Detailed Descriptions

Draft as of 2025-01-22

Definitions for the mal-patient resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Patient
2. Patient.identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
Must Supporttrue
4. Patient.name
6. Patient.name.family
Must Supporttrue

Guidance on how to interpret the contents of this table can be found here

0. Patient
Definition

Demographics and other administrative information about an individual or animal receiving care or other health-related services.

ShortInformation about an individual or animal receiving health care services
Control0..*
Is Modifierfalse
Summaryfalse
Alternate NamesSubjectOfCare Client Resident, Pasient
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Patient.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Patient.extension:citizenship
Slice Namecitizenship
Definition

The citizenship of the patient. should be a country code from ISO 3166 code system

ShortThe citizenship of the patient
Control0..*
TypeExtension(Patient Citizenship) (Complex Extension)
Is Modifierfalse
Alternate Namesstatsborgerskap
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Patient.extension:citizenship.extension:code
Slice Namecode
Definition

no-basis-Patient introduces iso 3166 codes

Nation code representing the citizenship of patient.

ShortExtensionAdditional content defined by implementations
Control0..1*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Patient.extension:citizenship.extension:code.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 10. Patient.extension:citizenship.extension:code.url
    Definition

    Source of the definition for the extension code - a logical name or a URL.

    Shortidentifies the meaning of the extension
    Comments

    The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

    Control1..1
    Typeuri
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    Fixed Valuecode
    12. Patient.extension:citizenship.extension:code.value[x]
    Definition

    Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).


    Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

    ShortValue of extension
    Control10..1
    TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. Patient.extension:citizenship.extension:period
    Slice Nameperiod
    Definition

    Period when citizenship was effective.

    ShortTime period of citizenshipAdditional content defined by implementations
    Control0..1*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    16. Patient.extension:citizenship.extension:period.extension
    Definition

    An Extension


    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortExtensionAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..0*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Patient.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 18. Patient.extension:citizenship.extension:period.url
      Definition

      Source of the definition for the extension code - a logical name or a URL.

      Shortidentifies the meaning of the extension
      Comments

      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

      Control1..1
      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      Fixed Valueperiod
      20. Patient.extension:citizenship.extension:period.value[x]
      Definition

      Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).


      Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

      ShortValue of extension
      Control10..1
      TypePeriod, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. Patient.extension:citizenship.url
      Definition

      Source of the definition for the extension code - a logical name or a URL.

      Shortidentifies the meaning of the extension
      Comments

      The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

      Control1..1
      Typeuri
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      Fixed Valuehttp://hl7.org/fhir/StructureDefinition/patient-citizenship
      24. Patient.extension:citizenship.value[x]
      Definition

      Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).


      Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

      ShortValue of extension
      Control0..01
      TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. Patient.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
      Summaryfalse
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      28. Patient.identifier
      Definition

      An identifier for this patient. Should be at Fødselsnummer, Felles hjelpenummer, D-nummer or locally assigned H-nummer


      An identifier for this patient.

      ShortIdentifier for this patientAn identifier for this patient
      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..*
      TypeIdentifier
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Patients are almost always assigned specific numerical identifiers.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      SlicingThis element introduces a set of slices on Patient.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ system
      • 30. Patient.identifier:FNR
        Slice NameFNR
        Definition

        Fødselsnummer for the patient. Fødselsnummer as one of the possible patient identifier, should at least be sent unless there is a reason not to. Reasons for not sending the Fødselsnummer include but are not limited to, research and apps without a contract for processing data.

        Multiple FNR can exist for a person. If several FNR is provided the time period that each identifier is valid should be provided. No information about period is required when only one FNR is provided.


        An identifier for this patient.

        ShortNorwegian FNRAn identifier for this patient
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..*
        TypeIdentifier
        Is Modifierfalse
        Summarytrue
        Requirements

        Patients are almost always assigned specific numerical identifiers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        32. Patient.identifier:FNR.use
        Definition

        The purpose of this identifier.

        Shortusual | official | temp | secondary | old (If known)
        Comments

        Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

        Control0..1
        BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
        (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

        Identifies the purpose for this identifier, if known .

        Typecode
        Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        34. Patient.identifier:FNR.system
        Definition

        Identifies that this is a Norwegian Fødselsnummer


        Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

        ShortIdentification of the Norwegian FNRThe namespace for the identifier value
        Comments

        Identifier.system is always case sensitive.

        Control10..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

        Fixed Valueurn:oid:2.16.578.1.12.4.1.4.1
        Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        36. Patient.identifier:FNR.value
        Definition

        The Norwegian Fødselsnummer


        The portion of the identifier typically relevant to the user and which is unique within the context of the system.

        ShortThe actual FødselsnummerThe value that is unique
        Comments

        If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

        Control10..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Alternate NamesFødselsnummer
        Example<br/><b>General</b>:123456 <br/><b>Fødselsnummer</b>:13057444850
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        38. Patient.identifier:FHN
        Slice NameFHN
        Definition

        Felles hjelpenummer for the patient. Felles hjelpenummer as one of the possible patient identification numbers. The norwegian Felles hjelpenummer shoud only be used when the Fødselsnummer og D-number is unknown.


        An identifier for this patient.

        ShortFelles hjelpenummer used for the patientAn identifier for this patient
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..*
        TypeIdentifier
        Is Modifierfalse
        Summarytrue
        Requirements

        Patients are almost always assigned specific numerical identifiers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        40. Patient.identifier:FHN.use
        Definition

        The purpose of this identifier.

        Shortusual | official | temp | secondary | old (If known)
        Comments

        Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

        Control0..1
        BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
        (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

        Identifies the purpose for this identifier, if known .

        Typecode
        Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        42. Patient.identifier:FHN.system
        Definition

        Norwegian felles hjelpenummer


        Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

        ShortIdentification of the Norwegian felles hjelpenummerThe namespace for the identifier value
        Comments

        Identifier.system is always case sensitive.

        Control10..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

        Fixed Valueurn:oid:2.16.578.1.12.4.1.4.3
        Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        44. Patient.identifier:FHN.value
        Definition

        The actual Norwegian Hjelpenummer


        The portion of the identifier typically relevant to the user and which is unique within the context of the system.

        ShortThe actual HjelpenummerThe value that is unique
        Comments

        If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

        Control10..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Example<br/><b>General</b>:123456
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        46. Patient.identifier:DNR
        Slice NameDNR
        Definition

        The D-nummer of the patient. (assigned by the norwegian Skatteetaten)


        An identifier for this patient.

        ShortThe D-nummer of the patientAn identifier for this patient
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..*
        TypeIdentifier
        Is Modifierfalse
        Summarytrue
        Requirements

        Patients are almost always assigned specific numerical identifiers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        48. Patient.identifier:DNR.use
        Definition

        The purpose of this identifier.

        Shortusual | official | temp | secondary | old (If known)
        Comments

        Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

        Control0..1
        BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
        (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

        Identifies the purpose for this identifier, if known .

        Typecode
        Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        50. Patient.identifier:DNR.system
        Definition

        The identification of the Norwegian D-nummer


        Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

        ShortThe identification of the D-nummerThe namespace for the identifier value
        Comments

        Identifier.system is always case sensitive.

        Control10..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

        Fixed Valueurn:oid:2.16.578.1.12.4.1.4.2
        Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        52. Patient.identifier:DNR.value
        Definition

        The actual Norwegian D-nummer


        The portion of the identifier typically relevant to the user and which is unique within the context of the system.

        ShortThe actual D-nummerThe value that is unique
        Comments

        If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

        Control10..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Example<br/><b>General</b>:123456
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        54. Patient.identifier:HNR
        Slice NameHNR
        Definition

        A locally assigned H-nummer. If this identifier is used, information about the assigner is mandatory. Merk at lokale hjelpenummer (H-nummer) for pasient ikke garanterer at kombinasjonen system og value er gir unik identifikasjon, siden disse tildeles på lokalt i det enkelte kliniske fagsystem. Felles nasjonale hjelpenummer utstedt av tjenesten for felles hjelpenummer er imidlertid unike i Norge (og globalt unike i kombinasjon med system).


        An identifier for this patient.

        ShortA locally assigned H-nummerAn identifier for this patient
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..*
        TypeIdentifier
        Is Modifierfalse
        Summarytrue
        Requirements

        Patients are almost always assigned specific numerical identifiers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        56. Patient.identifier:HNR.use
        Definition

        The purpose of this identifier.

        Shortusual | official | temp | secondary | old (If known)
        Comments

        Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

        Control0..1
        BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1
        (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

        Identifies the purpose for this identifier, if known .

        Typecode
        Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        58. Patient.identifier:HNR.system
        Definition

        Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

        ShortThe namespace for the identifier value
        Comments

        Identifier.system is always case sensitive.

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

        Fixed ValueHNR
        Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        60. Patient.identifier:HNR.value
        Definition

        The actual Hjelpenummer.

        The portion of the identifier typically relevant to the user and which is unique within the context of the system.


        The portion of the identifier typically relevant to the user and which is unique within the context of the system.

        ShortThe value that is unique
        Comments

        If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

        Control10..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Example<br/><b>General</b>:123456
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        62. Patient.identifier:HNR.assigner
        Definition

        Assigner is mandatory for localy assigne Hjelpenummer.

        Organization that issued/manages the identifier.


        Organization that issued/manages the identifier.

        ShortOrganization that issued id (may be just text)
        Comments

        The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

        Control10..1
        TypeReference(Organization)
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        64. Patient.active
        Definition

        Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules.

        It is often used to filter patient lists to exclude inactive patients

        Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.

        ShortWhether this patient's record is in active use
        Comments

        If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.

        Control0..1
        Typeboolean
        Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Need to be able to mark a patient record as not to be used because it was created in error.

        Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        66. Patient.name
        Definition

        A name associated with the individual.

        ShortA name associated with the patient
        Comments

        A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

        Control0..*
        TypeHumanName(no-basis-HumanName)
        Is Modifierfalse
        Summarytrue
        Requirements

        Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        68. Patient.name.extension:middlename
        Slice Namemiddlename
        Definition

        Defines a middle name as a specific extension as this is widely used in Norwegian names. The middlename is defined in norwegian legislation (lov om personnavn).

        ShortDefines a middle name
        Control0..*
        TypeExtension(no-basis-middlename) (Extension Type: string)
        Is Modifierfalse
        Summaryfalse
        Alternate Namesmellomnavn
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        70. Patient.name.use
        Definition

        Identifies the purpose for this name.

        Shortusual | official | temp | nickname | anonymous | old | maiden
        Comments

        Applications can assume that a name is current unless it explicitly says that it is temporary or old.

        Control0..1
        BindingThe codes SHALL be taken from NameUsehttp://hl7.org/fhir/ValueSet/name-use|4.0.1
        (required to http://hl7.org/fhir/ValueSet/name-use|4.0.1)

        The use of a human name.

        Typecode
        Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Allows the appropriate name for a particular context of use to be selected from among a set of names.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        72. Patient.name.family
        Definition

        Ref. "lov om personnavn" for further details about Norwegian HumanNames.

        The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.


        The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

        ShortFamily name (often called 'Surname')
        Comments

        Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Alternate Namessurname, etternavn
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        74. Patient.deceased[x]
        Definition

        Indicates if the individual is deceased or not.

        ShortIndicates if the individual is deceased or not
        Comments

        If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

        Control0..1
        TypeChoice of: boolean, dateTime
        [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
        Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        76. Patient.link
        Definition

        Link to another patient resource that concerns the same actual patient.

        ShortLink to another patient resource that concerns the same actual person
        Comments

        There is no assumption that linked patient records have mutual links.

        Control0..*
        TypeBackboneElement
        Is Modifiertrue because This element is labeled as a modifier because it might not be the main Patient resource, and the referenced patient should be used instead of this Patient record. This is when the link.type value is 'replaced-by'
        Summarytrue
        Requirements

        There are multiple use cases:

        • Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and
        • Distribution of patient information across multiple servers.
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        78. Patient.link.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored even if unrecognized
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
        Summarytrue
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content, modifiers
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        80. Patient.link.other
        Definition

        The other patient resource that the link refers to.

        ShortThe other patient or related person resource that the link refers to
        Comments

        Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual.

        Control1..1
        TypeReference(Patient, RelatedPerson)
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        82. Patient.link.type
        Definition

        The type of link between this patient resource and another patient resource.

        Shortreplaced-by | replaces | refer | seealso
        Control1..1
        BindingThe codes SHALL be taken from LinkTypehttp://hl7.org/fhir/ValueSet/link-type|4.0.1
        (required to http://hl7.org/fhir/ValueSet/link-type|4.0.1)

        The type of link between this patient resource and another patient resource.

        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

        Guidance on how to interpret the contents of this table can be found here

        0. Patient
        Definition

        Demographics and other administrative information about an individual or animal receiving care or other health-related services.

        ShortInformation about an individual or animal receiving health care services
        Control0..*
        Is Modifierfalse
        Summaryfalse
        Alternate NamesSubjectOfCare Client Resident, Pasient
        Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
        dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
        dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
        dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
        dom-6: A resource should have narrative for robust management (text.`div`.exists())
        2. Patient.id
        Definition

        The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

        ShortLogical id of this artifact
        Comments

        The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

        Control0..1
        Typeid
        Is Modifierfalse
        Summarytrue
        4. Patient.meta
        Definition

        The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

        ShortMetadata about the resource
        Control0..1
        TypeMeta
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        6. Patient.implicitRules
        Definition

        A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

        ShortA set of rules under which this content was created
        Comments

        Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

        Control0..1
        Typeuri
        Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        8. Patient.language
        Definition

        The base language in which the resource is written.

        ShortLanguage of the resource content
        Comments

        Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

        Control0..1
        BindingThe codes SHOULD be taken from CommonLanguages
        (preferred to http://hl7.org/fhir/ValueSet/languages)

        A human language.

        Additional BindingsPurpose
        AllLanguagesMax Binding
        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        10. Patient.text
        Definition

        A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

        ShortText summary of the resource, for human interpretation
        Comments

        Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

        Control0..1
        TypeNarrative
        Is Modifierfalse
        Summaryfalse
        Alternate Namesnarrative, html, xhtml, display
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        12. Patient.contained
        Definition

        These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

        ShortContained, inline Resources
        Comments

        This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

        Control0..*
        TypeResource
        Is Modifierfalse
        Summaryfalse
        Alternate Namesinline resources, anonymous resources, contained resources
        14. Patient.extension
        Definition

        An Extension

        ShortExtension
        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Patient.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 16. Patient.extension:citizenship
          Slice Namecitizenship
          Definition

          The citizenship of the patient. should be a country code from ISO 3166 code system

          ShortThe citizenship of the patient
          Control0..*
          TypeExtension(Patient Citizenship) (Complex Extension)
          Is Modifierfalse
          Alternate Namesstatsborgerskap
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          18. Patient.extension:citizenship.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          20. Patient.extension:citizenship.extension
          Definition

          An Extension

          ShortExtension
          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Patient.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 22. Patient.extension:citizenship.extension:code
            Slice Namecode
            Definition

            no-basis-Patient introduces iso 3166 codes

            Nation code representing the citizenship of patient.

            ShortExtension
            Control0..1
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            24. Patient.extension:citizenship.extension:code.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            26. Patient.extension:citizenship.extension:code.extension
            Definition

            An Extension

            ShortExtension
            Control0..0
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Patient.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 28. Patient.extension:citizenship.extension:code.url
              Definition

              Source of the definition for the extension code - a logical name or a URL.

              Shortidentifies the meaning of the extension
              Comments

              The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

              Control1..1
              Typeuri
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              Fixed Valuecode
              30. Patient.extension:citizenship.extension:code.value[x]
              Definition

              Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

              ShortValue of extension
              Control1..1
              TypeCodeableConcept
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              32. Patient.extension:citizenship.extension:period
              Slice Nameperiod
              Definition

              Period when citizenship was effective.

              ShortTime period of citizenship
              Control0..1
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              34. Patient.extension:citizenship.extension:period.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              36. Patient.extension:citizenship.extension:period.extension
              Definition

              An Extension

              ShortExtension
              Control0..0
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on Patient.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 38. Patient.extension:citizenship.extension:period.url
                Definition

                Source of the definition for the extension code - a logical name or a URL.

                Shortidentifies the meaning of the extension
                Comments

                The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                Control1..1
                Typeuri
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                Fixed Valueperiod
                40. Patient.extension:citizenship.extension:period.value[x]
                Definition

                Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                ShortValue of extension
                Control1..1
                TypePeriod
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                42. Patient.extension:citizenship.url
                Definition

                Source of the definition for the extension code - a logical name or a URL.

                Shortidentifies the meaning of the extension
                Comments

                The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

                Control1..1
                Typeuri
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                Fixed Valuehttp://hl7.org/fhir/StructureDefinition/patient-citizenship
                44. Patient.extension:citizenship.value[x]
                Definition

                Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

                ShortValue of extension
                Control0..0
                TypeChoice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                46. Patient.modifierExtension
                Definition

                May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                ShortExtensions that cannot be ignored
                Comments

                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                Control0..*
                TypeExtension
                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
                Summaryfalse
                Requirements

                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                Alternate Namesextensions, user content
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                48. Patient.identifier
                Definition

                An identifier for this patient. Should be at Fødselsnummer, Felles hjelpenummer, D-nummer or locally assigned H-nummer

                ShortIdentifier for this patient
                NoteThis is a business identifier, not a resource identifier (see discussion)
                Control0..*
                TypeIdentifier
                Is Modifierfalse
                Must Supporttrue
                Summarytrue
                Requirements

                Patients are almost always assigned specific numerical identifiers.

                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                SlicingThis element introduces a set of slices on Patient.identifier. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ system
                • 50. Patient.identifier:FNR
                  Slice NameFNR
                  Definition

                  Fødselsnummer for the patient. Fødselsnummer as one of the possible patient identifier, should at least be sent unless there is a reason not to. Reasons for not sending the Fødselsnummer include but are not limited to, research and apps without a contract for processing data.

                  Multiple FNR can exist for a person. If several FNR is provided the time period that each identifier is valid should be provided. No information about period is required when only one FNR is provided.

                  ShortNorwegian FNR
                  NoteThis is a business identifier, not a resource identifier (see discussion)
                  Control0..*
                  TypeIdentifier
                  Is Modifierfalse
                  Summarytrue
                  Requirements

                  Patients are almost always assigned specific numerical identifiers.

                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  52. Patient.identifier:FNR.id
                  Definition

                  Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                  ShortUnique id for inter-element referencing
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  54. Patient.identifier:FNR.extension
                  Definition

                  May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                  ShortAdditional content defined by implementations
                  Comments

                  There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Alternate Namesextensions, user content
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  SlicingThis element introduces a set of slices on Patient.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 56. Patient.identifier:FNR.use
                    Definition

                    The purpose of this identifier.

                    Shortusual | official | temp | secondary | old (If known)
                    Comments

                    Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                    Control0..1
                    BindingThe codes SHALL be taken from IdentifierUse
                    (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                    Identifies the purpose for this identifier, if known .

                    Typecode
                    Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Requirements

                    Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    58. Patient.identifier:FNR.type
                    Definition

                    A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                    ShortDescription of identifier
                    Comments

                    This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                    Control0..1
                    BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                    (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

                    A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                    TypeCodeableConcept
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    Allows users to make use of identifiers when the identifier system is not known.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    60. Patient.identifier:FNR.system
                    Definition

                    Identifies that this is a Norwegian Fødselsnummer

                    ShortIdentification of the Norwegian FNR
                    Comments

                    Identifier.system is always case sensitive.

                    Control1..1
                    Typeuri
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Requirements

                    There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                    Fixed Valueurn:oid:2.16.578.1.12.4.1.4.1
                    Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    62. Patient.identifier:FNR.value
                    Definition

                    The Norwegian Fødselsnummer

                    ShortThe actual Fødselsnummer
                    Comments

                    If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                    Control1..1
                    Typestring
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Summarytrue
                    Alternate NamesFødselsnummer
                    Example<br/><b>General</b>:123456 <br/><b>Fødselsnummer</b>:13057444850
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    64. Patient.identifier:FNR.period
                    Definition

                    Time period during which identifier is/was valid for use.

                    ShortTime period when id is/was valid for use
                    Control0..1
                    TypePeriod
                    Is Modifierfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    66. Patient.identifier:FNR.assigner
                    Definition

                    Organization that issued/manages the identifier.

                    ShortOrganization that issued id (may be just text)
                    Comments

                    The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                    Control0..1
                    TypeReference(Organization)
                    Is Modifierfalse
                    Summarytrue
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    68. Patient.identifier:FHN
                    Slice NameFHN
                    Definition

                    Felles hjelpenummer for the patient. Felles hjelpenummer as one of the possible patient identification numbers. The norwegian Felles hjelpenummer shoud only be used when the Fødselsnummer og D-number is unknown.

                    ShortFelles hjelpenummer used for the patient
                    NoteThis is a business identifier, not a resource identifier (see discussion)
                    Control0..*
                    TypeIdentifier
                    Is Modifierfalse
                    Summarytrue
                    Requirements

                    Patients are almost always assigned specific numerical identifiers.

                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    70. Patient.identifier:FHN.id
                    Definition

                    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                    ShortUnique id for inter-element referencing
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    72. Patient.identifier:FHN.extension
                    Definition

                    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                    ShortAdditional content defined by implementations
                    Comments

                    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Alternate Namesextensions, user content
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    SlicingThis element introduces a set of slices on Patient.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 74. Patient.identifier:FHN.use
                      Definition

                      The purpose of this identifier.

                      Shortusual | official | temp | secondary | old (If known)
                      Comments

                      Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                      Control0..1
                      BindingThe codes SHALL be taken from IdentifierUse
                      (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                      Identifies the purpose for this identifier, if known .

                      Typecode
                      Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      76. Patient.identifier:FHN.type
                      Definition

                      A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                      ShortDescription of identifier
                      Comments

                      This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                      Control0..1
                      BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                      (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

                      A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Summarytrue
                      Requirements

                      Allows users to make use of identifiers when the identifier system is not known.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      78. Patient.identifier:FHN.system
                      Definition

                      Norwegian felles hjelpenummer

                      ShortIdentification of the Norwegian felles hjelpenummer
                      Comments

                      Identifier.system is always case sensitive.

                      Control1..1
                      Typeuri
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Requirements

                      There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                      Fixed Valueurn:oid:2.16.578.1.12.4.1.4.3
                      Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      80. Patient.identifier:FHN.value
                      Definition

                      The actual Norwegian Hjelpenummer

                      ShortThe actual Hjelpenummer
                      Comments

                      If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                      Control1..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Example<br/><b>General</b>:123456
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      82. Patient.identifier:FHN.period
                      Definition

                      Time period during which identifier is/was valid for use.

                      ShortTime period when id is/was valid for use
                      Control0..1
                      TypePeriod
                      Is Modifierfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      84. Patient.identifier:FHN.assigner
                      Definition

                      Organization that issued/manages the identifier.

                      ShortOrganization that issued id (may be just text)
                      Comments

                      The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                      Control0..1
                      TypeReference(Organization)
                      Is Modifierfalse
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      86. Patient.identifier:DNR
                      Slice NameDNR
                      Definition

                      The D-nummer of the patient. (assigned by the norwegian Skatteetaten)

                      ShortThe D-nummer of the patient
                      NoteThis is a business identifier, not a resource identifier (see discussion)
                      Control0..*
                      TypeIdentifier
                      Is Modifierfalse
                      Summarytrue
                      Requirements

                      Patients are almost always assigned specific numerical identifiers.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      88. Patient.identifier:DNR.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      90. Patient.identifier:DNR.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      SlicingThis element introduces a set of slices on Patient.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                      • value @ url
                      • 92. Patient.identifier:DNR.use
                        Definition

                        The purpose of this identifier.

                        Shortusual | official | temp | secondary | old (If known)
                        Comments

                        Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                        Control0..1
                        BindingThe codes SHALL be taken from IdentifierUse
                        (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                        Identifies the purpose for this identifier, if known .

                        Typecode
                        Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Requirements

                        Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        94. Patient.identifier:DNR.type
                        Definition

                        A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                        ShortDescription of identifier
                        Comments

                        This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                        Control0..1
                        BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                        (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

                        A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                        TypeCodeableConcept
                        Is Modifierfalse
                        Summarytrue
                        Requirements

                        Allows users to make use of identifiers when the identifier system is not known.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        96. Patient.identifier:DNR.system
                        Definition

                        The identification of the Norwegian D-nummer

                        ShortThe identification of the D-nummer
                        Comments

                        Identifier.system is always case sensitive.

                        Control1..1
                        Typeuri
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Requirements

                        There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                        Fixed Valueurn:oid:2.16.578.1.12.4.1.4.2
                        Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        98. Patient.identifier:DNR.value
                        Definition

                        The actual Norwegian D-nummer

                        ShortThe actual D-nummer
                        Comments

                        If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                        Control1..1
                        Typestring
                        Is Modifierfalse
                        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                        Summarytrue
                        Example<br/><b>General</b>:123456
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        100. Patient.identifier:DNR.period
                        Definition

                        Time period during which identifier is/was valid for use.

                        ShortTime period when id is/was valid for use
                        Control0..1
                        TypePeriod
                        Is Modifierfalse
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        102. Patient.identifier:DNR.assigner
                        Definition

                        Organization that issued/manages the identifier.

                        ShortOrganization that issued id (may be just text)
                        Comments

                        The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                        Control0..1
                        TypeReference(Organization)
                        Is Modifierfalse
                        Summarytrue
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        104. Patient.identifier:HNR
                        Slice NameHNR
                        Definition

                        A locally assigned H-nummer. If this identifier is used, information about the assigner is mandatory. Merk at lokale hjelpenummer (H-nummer) for pasient ikke garanterer at kombinasjonen system og value er gir unik identifikasjon, siden disse tildeles på lokalt i det enkelte kliniske fagsystem. Felles nasjonale hjelpenummer utstedt av tjenesten for felles hjelpenummer er imidlertid unike i Norge (og globalt unike i kombinasjon med system).

                        ShortA locally assigned H-nummer
                        NoteThis is a business identifier, not a resource identifier (see discussion)
                        Control0..*
                        TypeIdentifier
                        Is Modifierfalse
                        Summarytrue
                        Requirements

                        Patients are almost always assigned specific numerical identifiers.

                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        106. Patient.identifier:HNR.id
                        Definition

                        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                        ShortUnique id for inter-element referencing
                        Control0..1
                        Typestring
                        Is Modifierfalse
                        XML FormatIn the XML format, this property is represented as an attribute.
                        Summaryfalse
                        108. Patient.identifier:HNR.extension
                        Definition

                        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                        ShortAdditional content defined by implementations
                        Comments

                        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                        Control0..*
                        TypeExtension
                        Is Modifierfalse
                        Summaryfalse
                        Alternate Namesextensions, user content
                        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                        SlicingThis element introduces a set of slices on Patient.identifier.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                        • value @ url
                        • 110. Patient.identifier:HNR.use
                          Definition

                          The purpose of this identifier.

                          Shortusual | official | temp | secondary | old (If known)
                          Comments

                          Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

                          Control0..1
                          BindingThe codes SHALL be taken from IdentifierUse
                          (required to http://hl7.org/fhir/ValueSet/identifier-use|4.0.1)

                          Identifies the purpose for this identifier, if known .

                          Typecode
                          Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one.
                          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                          Summarytrue
                          Requirements

                          Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          112. Patient.identifier:HNR.type
                          Definition

                          A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

                          ShortDescription of identifier
                          Comments

                          This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

                          Control0..1
                          BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes
                          (extensible to http://hl7.org/fhir/ValueSet/identifier-type)

                          A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

                          TypeCodeableConcept
                          Is Modifierfalse
                          Summarytrue
                          Requirements

                          Allows users to make use of identifiers when the identifier system is not known.

                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          114. Patient.identifier:HNR.type.id
                          Definition

                          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                          ShortUnique id for inter-element referencing
                          Control0..1
                          Typestring
                          Is Modifierfalse
                          XML FormatIn the XML format, this property is represented as an attribute.
                          Summaryfalse
                          116. Patient.identifier:HNR.type.extension
                          Definition

                          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                          ShortAdditional content defined by implementations
                          Comments

                          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                          Control0..*
                          TypeExtension
                          Is Modifierfalse
                          Summaryfalse
                          Alternate Namesextensions, user content
                          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                          SlicingThis element introduces a set of slices on Patient.identifier.type.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                          • value @ url
                          • 118. Patient.identifier:HNR.type.coding
                            Definition

                            A reference to a code defined by a terminology system.

                            ShortCode defined by a terminology system
                            Comments

                            Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.

                            Control0..*
                            TypeCoding
                            Is Modifierfalse
                            Summarytrue
                            Requirements

                            Allows for alternative encodings within a code system, and translations to other code systems.

                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            120. Patient.identifier:HNR.type.coding.id
                            Definition

                            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                            ShortUnique id for inter-element referencing
                            Control0..1
                            Typestring
                            Is Modifierfalse
                            XML FormatIn the XML format, this property is represented as an attribute.
                            Summaryfalse
                            122. Patient.identifier:HNR.type.coding.extension
                            Definition

                            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                            ShortAdditional content defined by implementations
                            Comments

                            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                            Control0..*
                            TypeExtension
                            Is Modifierfalse
                            Summaryfalse
                            Alternate Namesextensions, user content
                            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                            SlicingThis element introduces a set of slices on Patient.identifier.type.coding.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                            • value @ url
                            • 124. Patient.identifier:HNR.type.coding.system
                              Definition

                              CodeSystem on Volven for official personal identifiers. The identification of the code system that defines the meaning of the symbol in the code.

                              ShortIdentity of the terminology system
                              Comments

                              The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.

                              Control1..1
                              Typeuri
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              Need to be unambiguous about the source of the definition of the symbol.

                              Fixed Valueurn:oid:2.16.578.1.12.4.1.1.8327
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              126. Patient.identifier:HNR.type.coding.version
                              Definition

                              The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

                              ShortVersion of the system - if relevant
                              Comments

                              Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

                              NoteThis is a business version Id, not a resource version Id (see discussion)
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              128. Patient.identifier:HNR.type.coding.code
                              Definition

                              The code for local Hjelpenummer in the CodeSystem

                              A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

                              ShortSymbol in syntax defined by the system
                              Control1..1
                              Typecode
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              Need to refer to a particular code in the system.

                              Fixed ValueHNR
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              130. Patient.identifier:HNR.type.coding.display
                              Definition

                              A representation of the meaning of the code in the system, following the rules of the system.

                              ShortRepresentation defined by the system
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              132. Patient.identifier:HNR.type.coding.userSelected
                              Definition

                              Indicates that this coding was chosen by a user directly - e.g. off a pick list of available items (codes or displays).

                              ShortIf this coding was chosen directly by the user
                              Comments

                              Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.

                              Control0..1
                              Typeboolean
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              134. Patient.identifier:HNR.type.text
                              Definition

                              A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

                              ShortPlain text representation of the concept
                              Comments

                              Very often the text is the same as a displayName of one of the codings.

                              Control0..1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              136. Patient.identifier:HNR.system
                              Definition

                              Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

                              ShortThe namespace for the identifier value
                              Comments

                              Identifier.system is always case sensitive.

                              Control0..1
                              Typeuri
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

                              Fixed ValueHNR
                              Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              138. Patient.identifier:HNR.value
                              Definition

                              The actual Hjelpenummer.

                              The portion of the identifier typically relevant to the user and which is unique within the context of the system.

                              ShortThe value that is unique
                              Comments

                              If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

                              Control1..1
                              Typestring
                              Is Modifierfalse
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Example<br/><b>General</b>:123456
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              140. Patient.identifier:HNR.period
                              Definition

                              Time period during which identifier is/was valid for use.

                              ShortTime period when id is/was valid for use
                              Control0..1
                              TypePeriod
                              Is Modifierfalse
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              142. Patient.identifier:HNR.assigner
                              Definition

                              Assigner is mandatory for localy assigne Hjelpenummer.

                              Organization that issued/manages the identifier.

                              ShortOrganization that issued id (may be just text)
                              Comments

                              The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

                              Control1..1
                              TypeReference(Organization)
                              Is Modifierfalse
                              Summarytrue
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              144. Patient.active
                              Definition

                              Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules.

                              It is often used to filter patient lists to exclude inactive patients

                              Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.

                              ShortWhether this patient's record is in active use
                              Comments

                              If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.

                              Control0..1
                              Typeboolean
                              Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
                              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                              Summarytrue
                              Requirements

                              Need to be able to mark a patient record as not to be used because it was created in error.

                              Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              146. Patient.name
                              Definition

                              A name associated with the individual.

                              ShortA name associated with the patient
                              Comments

                              A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

                              Control0..*
                              TypeHumanName(no-basis-HumanName)
                              Is Modifierfalse
                              Summarytrue
                              Requirements

                              Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              148. Patient.name.id
                              Definition

                              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                              ShortUnique id for inter-element referencing
                              Control0..1
                              Typestring
                              Is Modifierfalse
                              XML FormatIn the XML format, this property is represented as an attribute.
                              Summaryfalse
                              150. Patient.name.extension
                              Definition

                              An Extension

                              ShortExtension
                              Control0..*
                              TypeExtension
                              Is Modifierfalse
                              Summaryfalse
                              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                              SlicingThis element introduces a set of slices on Patient.name.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                              • value @ url
                              • 152. Patient.name.extension:middlename
                                Slice Namemiddlename
                                Definition

                                Defines a middle name as a specific extension as this is widely used in Norwegian names. The middlename is defined in norwegian legislation (lov om personnavn).

                                ShortDefines a middle name
                                Control0..*
                                TypeExtension(no-basis-middlename) (Extension Type: string)
                                Is Modifierfalse
                                Summaryfalse
                                Alternate Namesmellomnavn
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                154. Patient.name.use
                                Definition

                                Identifies the purpose for this name.

                                Shortusual | official | temp | nickname | anonymous | old | maiden
                                Comments

                                Applications can assume that a name is current unless it explicitly says that it is temporary or old.

                                Control0..1
                                BindingThe codes SHALL be taken from NameUse
                                (required to http://hl7.org/fhir/ValueSet/name-use|4.0.1)

                                The use of a human name.

                                Typecode
                                Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old name etc.for a current/permanent one
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                Allows the appropriate name for a particular context of use to be selected from among a set of names.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                156. Patient.name.text
                                Definition

                                Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

                                ShortText representation of the full name
                                Comments

                                Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

                                Control0..1
                                Typestring
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                A renderable, unencoded form.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                158. Patient.name.family
                                Definition

                                Ref. "lov om personnavn" for further details about Norwegian HumanNames.

                                The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

                                ShortFamily name (often called 'Surname')
                                Comments

                                Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

                                Control0..1
                                Typestring
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supporttrue
                                Summarytrue
                                Alternate Namessurname, etternavn
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                160. Patient.name.given
                                Definition

                                Given name. In Norway Given name does not include middlenames according to the regulation for norwegian names. Multiple given names are however legal. Ref. "Lov om personnavn" for further details about Norwegian HumanNames.

                                ShortGiven names (not always 'first')
                                Comments

                                If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

                                Control0..*
                                Typestring
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Alternate Namesfirst name, middle name, fornavn
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                162. Patient.name.prefix
                                Definition

                                This is not a part of official Norwegian names as defined in "lov om personnavn" regulation.

                                Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

                                ShortPrefix is not used in Norwegian names
                                Control0..*
                                Typestring
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supportfalse
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                164. Patient.name.suffix
                                Definition

                                This is not a part of official Norwegian names as defined in "lov om personnavn" regulation.

                                Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

                                ShortSuffix is not used in Norwegian human names
                                Control0..*
                                Typestring
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Must Supportfalse
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                166. Patient.name.period
                                Definition

                                Indicates the period of time when this name was valid for the named person.

                                ShortTime period when name was/is in use
                                Control0..1
                                TypePeriod
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                Allows names to be placed in historical context.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                168. Patient.telecom
                                Definition

                                A contact detail (e.g. a telephone number or an email address) by which the individual may be contacted.

                                ShortA contact detail for the individual
                                Comments

                                A Patient may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification. The address might not go directly to the individual, but may reach another party that is able to proxy for the patient (i.e. home phone, or pet owner's phone).

                                Control0..*
                                TypeContactPoint
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                People have (primary) ways to contact them in some way such as phone, email.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                170. Patient.gender
                                Definition

                                Administrative Gender - the gender that the patient is considered to have for administration and record keeping purposes.

                                Shortmale | female | other | unknown
                                Comments

                                The gender might not match the biological sex as determined by genetics or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than male and female, though the vast majority of systems and contexts only support male and female. Systems providing decision support or enforcing business rules should ideally do this on the basis of Observations dealing with the specific sex or gender aspect of interest (anatomical, chromosomal, social, etc.) However, because these observations are infrequently recorded, defaulting to the administrative gender is common practice. Where such defaulting occurs, rule enforcement should allow for the variation between administrative and biological, chromosomal and other gender aspects. For example, an alert about a hysterectomy on a male should be handled as a warning or overridable error, not a "hard" error. See the Patient Gender and Sex section for additional information about communicating patient gender and sex.

                                Control0..1
                                BindingThe codes SHALL be taken from AdministrativeGender
                                (required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

                                The gender of a person used for administrative purposes.

                                Typecode
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                Needed for identification of the individual, in combination with (at least) name and birth date.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                172. Patient.birthDate
                                Definition

                                The date of birth for the individual.

                                ShortThe date of birth for the individual
                                Comments

                                At least an estimated year should be provided as a guess if the real DOB is unknown There is a standard extension "patient-birthTime" available that should be used where Time is required (such as in maternity/infant care systems).

                                Control0..1
                                Typedate
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                Age of the individual drives many clinical processes.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                LOINC Code21112-8
                                174. Patient.deceased[x]
                                Definition

                                Indicates if the individual is deceased or not.

                                ShortIndicates if the individual is deceased or not
                                Comments

                                If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

                                Control0..1
                                TypeChoice of: boolean, dateTime
                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Requirements

                                The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                176. Patient.address
                                Definition

                                http://hl7.no/fhir/StructureDefinition/no-basis-Address

                                ShortNorwegian address
                                Comments

                                Patient may have multiple addresses with different uses or applicable periods.

                                Control0..*
                                TypeAddress(no-basis-Address)
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                178. Patient.maritalStatus
                                Definition

                                This field contains a patient's most recent marital (civil) status.

                                ShortMarital (civil) status of a patient
                                Control0..1
                                BindingUnless not suitable, these codes SHALL be taken from Marital Status Codes
                                (extensible to http://hl7.org/fhir/ValueSet/marital-status)

                                The domestic partnership status of a person.

                                TypeCodeableConcept
                                Is Modifierfalse
                                Summaryfalse
                                Requirements

                                Most, if not all systems capture it.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                180. Patient.multipleBirth[x]
                                Definition

                                Indicates whether the patient is part of a multiple (boolean) or indicates the actual birth order (integer).

                                ShortWhether patient is part of a multiple birth
                                Comments

                                Where the valueInteger is provided, the number is the birth number in the sequence. E.g. The middle birth in triplets would be valueInteger=2 and the third born would have valueInteger=3 If a boolean value was provided for this triplets example, then all 3 patient records would have valueBoolean=true (the ordering is not indicated).

                                Control0..1
                                TypeChoice of: boolean, integer
                                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summaryfalse
                                Requirements

                                For disambiguation of multiple-birth children, especially relevant where the care provider doesn't meet the patient, such as labs.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                182. Patient.photo
                                Definition

                                Image of the patient.

                                ShortImage of the patient
                                Comments

                                Guidelines:

                                • Use id photos, not clinical photos.
                                • Limit dimensions to thumbnail.
                                • Keep byte count low to ease resource updates.
                                Control0..*
                                TypeAttachment
                                Is Modifierfalse
                                Summaryfalse
                                Requirements

                                Many EHR systems have the capability to capture an image of the patient. Fits with newer social media usage too.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                184. Patient.contact
                                Definition

                                A contact party (e.g. guardian, partner, friend) for the patient.

                                ShortA contact party (e.g. guardian, partner, friend) for the patient
                                Comments

                                Contact covers all kinds of contact parties: family members, business contacts, guardians, caregivers. Not applicable to register pedigree and family ties beyond use of having contact.

                                Control0..*
                                TypeBackboneElement
                                Is Modifierfalse
                                Summaryfalse
                                Requirements

                                Need to track people you can contact about the patient.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                pat-1: SHALL at least contain a contact's details or a reference to an organization (name.exists() or telecom.exists() or address.exists() or organization.exists())
                                186. Patient.contact.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                188. Patient.contact.extension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                ShortAdditional content defined by implementations
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Alternate Namesextensions, user content
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                190. Patient.contact.modifierExtension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                ShortExtensions that cannot be ignored even if unrecognized
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                Summarytrue
                                Requirements

                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                Alternate Namesextensions, user content, modifiers
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                192. Patient.contact.relationship
                                Definition

                                The nature of the relationship between the patient and the contact person.

                                ShortThe kind of relationship
                                Control0..*
                                BindingUnless not suitable, these codes SHALL be taken from PatientContactRelationship
                                (extensible to http://hl7.org/fhir/ValueSet/patient-contactrelationship)

                                The nature of the relationship between a patient and a contact person for that patient.

                                TypeCodeableConcept
                                Is Modifierfalse
                                Summaryfalse
                                Requirements

                                Used to determine which contact person is the most relevant to approach, depending on circumstances.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                194. Patient.contact.name
                                Definition

                                A name associated with the contact person.

                                ShortA name associated with the contact person
                                Control0..1
                                TypeHumanName(no-basis-HumanName)
                                Is Modifierfalse
                                Summaryfalse
                                Requirements

                                Contact persons need to be identified by name, but it is uncommon to need details about multiple other names for that contact person.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                196. Patient.contact.telecom
                                Definition

                                A contact detail for the person, e.g. a telephone number or an email address.

                                ShortA contact detail for the person
                                Comments

                                Contact may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification.

                                Control0..*
                                TypeContactPoint
                                Is Modifierfalse
                                Summaryfalse
                                Requirements

                                People have (primary) ways to contact them in some way such as phone, email.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                198. Patient.contact.address
                                Definition

                                Address for the contact person.

                                ShortAddress for the contact person
                                Control0..1
                                TypeAddress(no-basis-Address)
                                Is Modifierfalse
                                Summaryfalse
                                Requirements

                                Need to keep track where the contact person can be contacted per postal mail or visited.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                200. Patient.contact.gender
                                Definition

                                Administrative Gender - the gender that the contact person is considered to have for administration and record keeping purposes.

                                Shortmale | female | other | unknown
                                Control0..1
                                BindingThe codes SHALL be taken from AdministrativeGender
                                (required to http://hl7.org/fhir/ValueSet/administrative-gender|4.0.1)

                                The gender of a person used for administrative purposes.

                                Typecode
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summaryfalse
                                Requirements

                                Needed to address the person correctly.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                202. Patient.contact.organization
                                Definition

                                Organization on behalf of which the contact is acting or for which the contact is working.

                                ShortOrganization that is associated with the contact
                                Control0..1
                                This element is affected by the following invariants: pat-1
                                TypeReference(Organization)
                                Is Modifierfalse
                                Summaryfalse
                                Requirements

                                For guardians or business related contacts, the organization is relevant.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                204. Patient.contact.period
                                Definition

                                The period during which this contact person or organization is valid to be contacted relating to this patient.

                                ShortThe period during which this contact person or organization is valid to be contacted relating to this patient
                                Control0..1
                                TypePeriod
                                Is Modifierfalse
                                Summaryfalse
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                206. Patient.communication
                                Definition

                                A language which may be used to communicate with the patient about his or her health.

                                ShortA language which may be used to communicate with the patient about his or her health
                                Comments

                                If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple Patient.Communication associations. For animals, language is not a relevant field, and should be absent from the instance. If the Patient does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required.

                                Control0..*
                                TypeBackboneElement
                                Is Modifierfalse
                                Summaryfalse
                                Requirements

                                If a patient does not speak the local language, interpreters may be required, so languages spoken and proficiency are important things to keep track of both for patient and other persons of interest.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                208. Patient.communication.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                210. Patient.communication.extension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                ShortAdditional content defined by implementations
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Alternate Namesextensions, user content
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                212. Patient.communication.modifierExtension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                ShortExtensions that cannot be ignored even if unrecognized
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                Summarytrue
                                Requirements

                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                Alternate Namesextensions, user content, modifiers
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                214. Patient.communication.language
                                Definition

                                The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-EN" for England English.

                                ShortThe language which can be used to communicate with the patient about his or her health
                                Comments

                                The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type.

                                Control1..1
                                BindingThe codes SHOULD be taken from CommonLanguages
                                (preferred to http://hl7.org/fhir/ValueSet/languages)

                                A human language.

                                Additional BindingsPurpose
                                AllLanguagesMax Binding
                                TypeCodeableConcept
                                Is Modifierfalse
                                Summaryfalse
                                Requirements

                                Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                216. Patient.communication.preferred
                                Definition

                                Indicates whether or not the patient prefers this language (over other languages he masters up a certain level).

                                ShortLanguage preference indicator
                                Comments

                                This language is specifically identified for communicating healthcare information.

                                Control0..1
                                Typeboolean
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summaryfalse
                                Requirements

                                People that master multiple languages up to certain level may prefer one or more, i.e. feel more confident in communicating in a particular language making other languages sort of a fall back method.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                218. Patient.generalPractitioner
                                Definition

                                Patient's nominated care provider.

                                ShortPatient's nominated primary care provider
                                Comments

                                This may be the primary care provider (in a GP context), or it may be a patient nominated care manager in a community/disability setting, or even organization that will provide people to perform the care provider roles. It is not to be used to record Care Teams, these should be in a CareTeam resource that may be linked to the CarePlan or EpisodeOfCare resources. Multiple GPs may be recorded against the patient for various reasons, such as a student that has his home GP listed along with the GP at university during the school semesters, or a "fly-in/fly-out" worker that has the onsite GP also included with his home GP to remain aware of medical issues.

                                Jurisdictions may decide that they can profile this down to 1 if desired, or 1 per type.

                                Control0..*
                                TypeReference(Organization, Practitioner, PractitionerRole, no-basis-Practitioner, no-basis-PractitionerRole, no-basis-Organization)
                                Is Modifierfalse
                                Summaryfalse
                                Alternate NamescareProvider
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                220. Patient.managingOrganization
                                Definition

                                Organization that is the custodian of the patient record.

                                ShortOrganization that is the custodian of the patient record
                                Comments

                                There is only one managing organization for a specific patient record. Other organizations will have their own Patient record, and may use the Link property to join the records together (or a Person resource which can include confidence ratings for the association).

                                Control0..1
                                TypeReference(Organization, no-basis-Organization)
                                Is Modifierfalse
                                Summarytrue
                                Requirements

                                Need to know who recognizes this patient record, manages and updates it.

                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                222. Patient.link
                                Definition

                                Link to another patient resource that concerns the same actual patient.

                                ShortLink to another patient resource that concerns the same actual person
                                Comments

                                There is no assumption that linked patient records have mutual links.

                                Control0..*
                                TypeBackboneElement
                                Is Modifiertrue because This element is labeled as a modifier because it might not be the main Patient resource, and the referenced patient should be used instead of this Patient record. This is when the link.type value is 'replaced-by'
                                Summarytrue
                                Requirements

                                There are multiple use cases:

                                • Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and
                                • Distribution of patient information across multiple servers.
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                224. Patient.link.id
                                Definition

                                Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                                ShortUnique id for inter-element referencing
                                Control0..1
                                Typestring
                                Is Modifierfalse
                                XML FormatIn the XML format, this property is represented as an attribute.
                                Summaryfalse
                                226. Patient.link.extension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                                ShortAdditional content defined by implementations
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifierfalse
                                Summaryfalse
                                Alternate Namesextensions, user content
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                228. Patient.link.modifierExtension
                                Definition

                                May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                                Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                                ShortExtensions that cannot be ignored even if unrecognized
                                Comments

                                There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                                Control0..*
                                TypeExtension
                                Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                                Summarytrue
                                Requirements

                                Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                                Alternate Namesextensions, user content, modifiers
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                                230. Patient.link.other
                                Definition

                                The other patient resource that the link refers to.

                                ShortThe other patient or related person resource that the link refers to
                                Comments

                                Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual.

                                Control1..1
                                TypeReference(Patient, RelatedPerson)
                                Is Modifierfalse
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                                232. Patient.link.type
                                Definition

                                The type of link between this patient resource and another patient resource.

                                Shortreplaced-by | replaces | refer | seealso
                                Control1..1
                                BindingThe codes SHALL be taken from LinkType
                                (required to http://hl7.org/fhir/ValueSet/link-type|4.0.1)

                                The type of link between this patient resource and another patient resource.

                                Typecode
                                Is Modifierfalse
                                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                                Summarytrue
                                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))